# Change one thing

> Deepgram workshops › Build a voice agent › Mission 01: Let me finish › Section 3 of 3
> Web version: https://workshops.deepgram.com/voice-agent/let-me-finish/change-one-thing
> About 25 min (estimate). Check it: `make check 01` (offline, no key).

## Set sensitivity to zero

**Do:** Set **Backchannel sensitivity** to 0, tap **Start the agent again**, and read the same number.

**Listen for:** who takes the gap. Set it back to 0.3 and tap **Reconnect and apply**.

_On the web page, this step has the Settings panel; in your own code the same settings are in the start file._

_On the web page, this step shows the code panel with the matching code._

_On the web page, this step has the agent console: talk or type to the agent there, or run the same mission in your own code._

**Check:** You heard what Backchannel sensitivity does. (Optional.)

## Try the presence knobs

**Do:** Stay quiet. Leave the presence knobs where they are.

**Listen for:** "still there?" after about 4 seconds, twice, then silence.

## Hard mode: ten digits, two pauses

**Do:** **Hard mode.** Read ten digits aloud in three pieces.

**Listen for:** it waiting through both pauses. Then tap **Hang up**.

**Check:** Hard mode: ten digits, two pauses. (Optional.)

## Take it home

Take it home: [Python](https://github.com/deepgram-devs/voice-agent-workshop/blob/main/python/missions/01-let-me-finish/start.py) or [TypeScript](https://github.com/deepgram-devs/voice-agent-workshop/blob/main/typescript/missions/01-let-me-finish/start.ts).

**How it works**

Say what changed in one sentence before you mark it: "at zero it answered after three digits; at 0.3 it hummed and waited."

The three sliders are three numbers in the timing block of the Settings message; the **Settings JSON** tab shows your values. The handlers in the code panel show where "mm-hm" and the presence check arrive, and how your app hangs up when the agent calls `end_call`.

The silence you counted is **Presence check interval**; the number of asks is **Max presence checks**. A max of 0 never asks; a short interval with a max of 5 asks five times close together. Tap **Hang up** when you're done listening. Change either one and tap **Reconnect and apply** to send it.

**Hard mode:** three digits, a pause, three more, a pause, the last four. If the call has ended, tap **Start the agent again** first. The check counts the pieces your voice arrived in and passes when the agent let you finish all ten. If it jumps in, raise **Backchannel sensitivity** a notch and tap **Reconnect and apply**.

The attendee project has this mission as four TODOs for the timing block and `end_call`, with an offline check.

The what-changed check is optional and on your honor.

**In production**

- **Watch:** talk-overs. A `UserStartedSpeaking` within a second or two of `AgentStartedSpeaking` usually means the agent took a turn the caller wasn't done with. Count them per call.
- **Aim for:** Backchannel sensitivity between 0.3 and 0.6 for callers reading numbers and addresses, and a presence check every 4 to 8 seconds with 1 or 2 checks before your app hangs up.
- **Read:** the [Mission 01 brief](https://github.com/deepgram-devs/voice-agent-workshop/blob/main/missions/01-let-me-finish/README.md) in the code project: each knob, what it does, and its wire name.

**What you tuned:** the timing layer. Same prompt, same voice, and now it knows when you're done talking.
